| RViz doesn't load .dae mesh. Cannot locate it. | 1 | True | thepirate16 | 2018-02-14 15:29:54 | 2018-02-14 19:38:49
|
| Unknown noise in uwsim 3D range mapping | 1 | True | thepirate16 | 2018-02-22 15:25:18 | 2018-05-24 21:57:36
|
| segmentation fault on running UWSim | 2 | True | michaelowenliu | 2012-04-16 04:40:21 | 2012-04-17 03:08:51
|
| osg missing? | 5 | True | apalomer | 2012-06-07 03:53:19 | 2014-09-13 04:02:44
|
| UWSim install problem | 1 | True | ee05073 | 2012-09-08 19:08:06 | 2012-09-08 20:29:23
|
| ROS Fuerte snags on OSX Lion | 2 | True | ee05073 | 2012-09-27 10:58:28 | 2012-09-28 08:17:57
|
| UWSim, Ubuntu 12.04, ros-fuerte installation problem | 3 | True | George P | 2012-10-09 10:25:44 | 2014-04-25 20:58:37
|
| .../install/lib/uwsim/uwsim_binary: error while loading shared libraries: libosgbCollision.so.2.00.02: cannot open shared object file: No such file or directory | 2 | True | a3738294 | 2014-06-30 18:24:19 | 2014-09-13 04:04:21
|
| Uwsim how to add Mass to terrain cirs_trident | 1 | True | User_810 | 2015-03-20 18:32:56 | 2015-03-24 16:55:04
|
| Missing resource | 2 | True | Marija-123 | 2013-03-11 16:24:01 | 2013-03-12 07:08:06
|
| rosrun UWSim error | 1 | True | Marija-123 | 2013-03-12 11:33:37 | 2013-03-12 12:59:19
|
| running UWSim commands in ROS | 1 | True | NKN | 2013-08-28 11:52:01 | 2013-08-29 18:05:08
|
| View from virtual camera in uwsim | 1 | True | Mind_hunter | 2014-08-12 10:49:22 | 2014-08-12 17:19:58
|
| Rosmake UWSim error - 1 package failed | 3 | True | Marija-123 | 2013-04-03 15:47:04 | 2014-09-13 04:05:21
|
| After update UWSim only with --disableShaders | 1 | True | Marija-123 | 2013-04-03 16:16:30 | 2013-04-05 03:12:15
|
| Adding one more g500 in uwsim? | 2 | True | Mind_hunter | 2014-08-11 11:35:58 | 2014-09-13 04:01:49
|
| Based on uwsim, what can I do to let the auv stop when pid was closed. | 1 | True | ZYS | 2016-03-09 21:36:10 | 2016-03-10 08:53:27
|
| UWSim install problem, Ubuntu 12.04,ROS Groovy | 1 | True | Jack Hanlen | 2014-09-13 03:33:12 | 2014-09-16 14:45:46
|
| scale tag in uwsim | 1 | True | VahidD | 2014-11-06 11:16:09 | 2014-11-06 12:35:30
|
| multi robots in uwsim | 1 | True | VahidD | 2014-11-06 17:06:12 | 2014-11-06 17:53:50
|
| Using UWSim GPS | 1 | True | raluse | 2015-03-19 15:42:48 | 2015-03-19 18:14:45
|
| How to define new topic in UWSIM? | 2 | True | User_810 | 2015-04-13 13:41:41 | 2015-04-13 14:47:37
|
| Launch file for UWSim problem. How do you write the node? | 1 | True | jhoban | 2015-07-24 01:20:46 | 2015-07-24 10:24:29
|
| rosrun UWSim | 2 | True | Marija-123 | 2013-03-25 11:36:39 | 2013-03-26 17:13:56
|
| Problem for building long baseline navigation system on UWSim | 1 | True | ZYS | 2016-01-27 14:32:20 | 2016-01-27 16:25:46
|
| uwsim problem while installation in indigo | 1 | True | yuvaram | 2016-02-03 15:56:59 | 2017-06-30 22:06:23
|
| the message of the topic '/g500/pose' and '/uwsim/girona500_odom' is not correct | 0 | False | ZYS | 2016-02-17 16:42:30 | 2016-02-17 16:42:30
|
| No mattter what the initial position I set, the position x and y subscribing from topic "/g500/pose" and "/uwsim/girona_500/odom is still 0, and z is increasing. | 1 | True | ZYS | 2016-02-25 14:35:43 | 2016-02-25 15:29:52
|
| based on uwsim, the orientation z from imu is in the inverval from -0.6 to 0.99, what is the unit of these values | 1 | True | ZYS | 2016-02-26 15:01:53 | 2016-03-01 10:59:21
|
| on uwsim, orientation from topic pose and topic imu is different. Why? | 1 | True | ZYS | 2016-03-01 00:21:31 | 2016-03-01 11:28:13
|
| pid for angle on uwsim | 1 | True | ZYS | 2016-03-01 18:51:44 | 2016-03-02 10:51:54
|
| URDF has inertia specified, apparently, but I can't find where. | 1 | True | jhoban | 2016-03-02 03:56:29 | 2021-12-13 12:06:51
|
| Why my computer suddenly need such a long time to start uwsim | 1 | True | ZYS | 2016-03-04 15:41:50 | 2016-03-05 07:12:41
|
| Based on uwsim, is it possible to set the friction force of water for the auv? | 1 | True | ZYS | 2016-03-11 16:33:54 | 2016-03-14 11:19:59
|
| Based on uwsim, I want to set the orientation of multibeam to make it point downward | 0 | False | ZYS | 2016-03-16 13:33:55 | 2016-03-16 13:33:55
|
| [solved] UWsim installscene.sh command not found | 1 | True | Wilmer | 2016-08-23 04:56:57 | 2018-04-25 18:28:46
|
| segmentation fault in running uwsim | 1 | True | Mind_hunter | 2014-10-06 08:15:57 | 2014-10-07 07:59:52
|
