| Title | Answers | Answered? | Asker | Created | Updated |
|---|---|---|---|---|---|
| FALHABER MCBL 3006 with canopen_motor_node. Homing failed | 0 | False | simchanu29 | 2018-03-09 17:04:55 | 2018-03-09 17:04:55 |
| canopen_motor_node initializing failed: Mode switch timed | 0 | False | yezi | 2021-06-25 12:47:17 | 2021-06-25 13:06:16 |
| Not able to initialize driver with canopen_motor_node | 0 | False | mjt_28 | 2019-06-13 08:34:12 | 2019-06-13 08:34:12 |
| canopen_motor_node not sending position commands | 0 | False | michROS | 2019-07-30 14:06:22 | 2019-07-30 14:19:59 |
| Why switching_state does not work properly ? | 0 | False | Piotr70 | 2020-01-06 20:21:51 | 2020-01-06 20:21:51 |
| Control Trinamic stepper using ros_canopen | 0 | False | Deakox | 2023-01-13 12:04:39 | 2023-01-13 12:04:39 |
| ros_canopen fails at init: transition timout | 0 | False | Shaevita | 2021-08-23 20:00:10 | 2021-08-23 20:00:10 |
| Issues with initializing motor driver using canopen_motor_node | 0 | False | JohnTGZ | 2021-08-24 07:20:14 | 2021-08-24 07:22:10 |
| FALHABER BXT with canopen_motor_node. Homing failed | 0 | False | ADIMADE | 2021-08-24 11:15:24 | 2021-08-25 17:41:27 |
| can not roslaunch canopen_motor_node as it throws an instance | 0 | False | microbot | 2020-09-22 12:05:55 | 2020-09-24 09:00:28 |
| Title | Answers | Answered? | Asker | Created | Updated |
|---|---|---|---|---|---|
| command igus-dryve with canopen_motor_node | 1 | False | michROS | 2019-07-17 13:56:49 | 2019-07-23 14:31:49 |
| canopen_motor_node throws error after init | 1 | False | Deakox | 2022-07-25 13:14:52 | 2023-04-18 13:44:52 |
| General understanding of ros-canopen | 2 | False | JulianS | 2018-05-29 15:56:50 | 2019-07-23 09:52:21 |
| Why canopen_motor_node exit code -6? | 1 | False | yezi | 2021-06-21 14:08:12 | 2021-06-22 16:33:07 |
| How to change the homing order | 1 | False | TLZ | 2021-07-07 15:12:03 | 2021-07-08 22:23:20 |
| motor oscillates after diff_drive_controller configuration | 1 | False | af.villamil231 | 2019-07-03 14:40:59 | 2019-07-18 10:13:38 |
| canopen motor node exit with error code -6 | 1 | False | Shaevita | 2021-08-05 23:05:45 | 2021-08-07 11:22:02 |
| ros_canopen vel_from_device: (obj606C) issue | 1 | False | akosodry | 2019-08-15 13:05:53 | 2019-08-15 21:47:31 |
| Control Trinamic motor using ros_canopen | 1 | False | JuliusGel | 2016-06-06 07:53:47 | 2016-06-06 09:18:38 |
| ros_canopen homing simultaneously or one-by-one? | 1 | False | akosodry | 2019-06-21 13:13:38 | 2019-06-21 15:07:26 |
| Title | Answers | Answered? | Asker | Created | Updated |
|---|---|---|---|---|---|
| ros_canopen Profile position + Interpolated position modes | 1 | True | akosodry | 2019-08-20 07:02:55 | 2019-08-20 07:56:51 |
| Canopen_motor_node, Error document empty | 1 | True | simchanu29 | 2018-03-07 13:08:45 | 2018-03-09 12:55:46 |
| Mode 7 is not available for rig1_plate_joint | 1 | False | xxx-robot | 2018-11-26 11:18:57 | 2018-11-27 08:02:55 |
| ros_canopen interpolated position mode, time period? | 1 | True | akosodry | 2019-08-31 09:17:16 | 2019-09-02 14:38:54 |
| How to control Faulhaber AES-4096 Motor by using ROS_CANopen? | 1 | True | nzach | 2019-12-17 09:36:37 | 2019-12-18 13:36:26 |
| rosp_canopen canopen_motor_node fails to compile / needs code edit to compile | 2 | True | Marcel Usai | 2015-07-21 14:16:43 | 2015-07-21 20:03:29 |
| Avatar | Name | Asked | Answered | Accepted |
|---|---|---|---|---|
| Anonymous | 0 | 18 | 5 |
| xxx-robot | 1 | 0 | 0 |
| microbot | 1 | 0 | 0 |
| af.villamil231 | 1 | 0 | 0 |
| TLZ | 1 | 0 | 0 |
| ADIMADE | 1 | 0 | 0 |
| Deakox | 2 | 0 | 0 |
| Shaevita | 2 | 0 | 0 |
| JulianS | 1 | 0 | 0 |
| michROS | 2 | 0 | 0 |
| Piotr70 | 1 | 0 | 0 |
| yezi | 2 | 0 | 0 |
| simchanu29 | 2 | 0 | 0 |
| Marcel Usai | 1 | 0 | 0 |
| mjt_28 | 1 | 0 | 0 |
| akosodry | 4 | 0 | 0 |
| JohnTGZ | 1 | 0 | 0 |
| nzach | 1 | 0 | 0 |
| JuliusGel | 1 | 0 | 0 |